SRC Toyota TS050 Hybrid LMP1 Chrono Kit

SRC Toyota TS050 Hybrid LMP1 Chrono Kit - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: News & Events (https://slotracer.online/community/forumdisplay.php?fid=38)
+--- Forum: News (https://slotracer.online/community/forumdisplay.php?fid=39)
+--- Thread: SRC Toyota TS050 Hybrid LMP1 Chrono Kit (/showthread.php?tid=2190)

SRC Toyota TS050 Hybrid LMP1 Chrono Kit - woodcote - 20th-May-21

[attachment=14874]

SRC 50001 Toyota LMP1 CHRONO Presentation Kit. RRP £84.95. Available June 2021

The wait for the first SRC LMP1 car is almost over. The first Chrono kit will be shipped from SRC HQ on Friday 4 June and Pendle Slot Racing expect to have it the following week. You can pre-order it now from their website here. Anthony took a close look at the car when it was announced last July. You can read his preview and updates on SlotRacer here.

The contents of the Toyota LMP1 Chrono kit are:

1 x T1-D chassis (hard) + 1 x Bolt T1 chassis support + 2 x 1.6x4mm screw (RM1014) + 2.5x6mm Allen hexagonal screw(RM1022)
1 x front axle diameter 2mm (RM0213) + 4 x front axle adjustment screw 2.5 × 2.5mm
2 x 15.85mm ABS front rim (RM0620) exclusive for 2mm axle + 2 x Grip-0 low profile tire (RN0201)
1 x T5 guide (RM0713) + 2 x braid (RM0706) + 1 x 1.8x6mm screw (RM1002) + 1 x 560/316 spacer (RM1405)
2 x Supremex SRC4 screw (RM1023) chassis and body joint + 1 x chassis rear photoetch
1 x AW T1 motor mount + Bolt T1 motor mount support + 3 x 1,6x4mm H.screw (RM1014) + Bolt T1 steel + Bolt T1 nylon
1 x 2.38mm hollow rear axle. Length 59.50mm (RM0214)
2 x bearing (RM0524) + 1 x stopper (RM0523) + 2 x 2x2mm H.screw (RM1008) + 1 x spacer length 1.8 and diameter 4mm (RM0507)
1 x 28z AW gear / crown (RM0410) + 1 x 2x2mm stud (RM1008) + 1 x 12z AW pinion (RM0305)
2 x 17mm rim (RM0613) + 2 x 2.5 × 2.5mm stud + 2 x rear tire (RN0118)
1 x P1 motor (RM0111) + FK motor flange + 1,4x4mm screw (RM1021) + 2x4mm motor screw (RM1006)
1 x rear shock absorber support + 2 x Supremex 5 SRC screw (RM1024) + 2 x Block-S screw (RM1021) + 2 x rear spring (RM0831)
2 x shock absorber side support + 2 x Supremex 2 SRC screw (RM1017) + 2 x L8,5x6E side spring (RM0833)
Body + accessories + light interior(cockpit) + 1 x Decals + Instruction book

Pendles have included a pdf of the instructions on the product listing.

With SRC ending relationships with national distributors, they have experienced a few problems. Pendles will be the official SRC retailer in the UK and will be listing future products for pre-order. The Costa Brava 1986 Lancia Delta S4 will arrive at the same time as the Toyota kit and can also be pre-ordered. There's a full range of spares, plus some new old stock SRC cars worth browsing - when they're gone, they're gone.

RE: SRC Toyota TS050 Hybrid LMP1 Chrono Kit - woodcote - 21st-May-21

Here are some pictures of the assembled kit that SRC have released in recent days...

[attachment=14888]

And these looking specifically at the suspension system...

[attachment=14889] [attachment=14890]

[attachment=14891] [attachment=14892]

[attachment=14893]

RE: SRC Toyota TS050 Hybrid LMP1 Chrono Kit - Savage GT - 24th-May-21

It looks nice and all, no dimensions/weight yet published.
Its hard to tell from pics but I have doubts the motor pod will be stiff enough between the motor and axle, but it could all be irrelevant anyway .... £85 for a white kit ? Angry

RE: SRC Toyota TS050 Hybrid LMP1 Chrono Kit - Beejay7 - 24th-May-21

Nice kit but way too expensive.