Ron Trackside 3D Printed Figures - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: Tracks & Scenery (https://slotracer.online/community/forumdisplay.php?fid=8)
+--- Forum: Scenery (https://slotracer.online/community/forumdisplay.php?fid=10)
+--- Thread: Ron Trackside 3D Printed Figures (/showthread.php?tid=2535)

---

RE: Ron Trackside 3D Printed Figures - rallyhub - 18th-Jan-24

Today Ron's new STNE Rally Set 01 arrived.
It is a brand new set of 16 different rally spectators.

There is a man sitting in a folding chair, leaning on his umbrella.
Another one sitting in a folding chair leans one foot on his cooler.
Three spectators are photographing the rally cars, one of them using a smart phone.
There are three women in the set. One of them is holding a cup of hot chocolate.
One man sits on the grass with a can in his hand and another one eats a sandwich while looking at the cars.
The other six are standing there watching the action.

Ron has once again produced a very well detailed set that will bring your track to life.
Here are two photos of the still unpainted set.

Hub

[attachment=33479][attachment=33480]
The complete STNE Rally Set 01.

---

RE: Ron Trackside 3D Printed Figures - Ron Trackside - 20th-Jan-24

Thanks Hub,

I'm really looking forward to seeing these painted and then trackside. 

Ron

---

RE: Ron Trackside 3D Printed Figures - rallyhub - 25th-Jan-24

My progress so far:

[attachment=33519][attachment=33520]

---

RE: Ron Trackside 3D Printed Figures - Fluff - 25th-Jan-24

Looking very good ,how did you find the two chaps in the chairs ,I thought they are quite difficult to paint?

---

RE: Ron Trackside 3D Printed Figures - rallyhub - 25th-Jan-24

So far no problem, but they are not ready yet. However, I expect the further details will be challenging.

Hub

---

RE: Ron Trackside 3D Printed Figures - rallyhub - 4th-Feb-24

Ron's rally spectator set is now ready.
The two men sitting in the folding chairs were not as difficult to paint as expected.
Ron's spectator set is also very useful on a race track.

[attachment=33637][attachment=33638]

[attachment=33639][attachment=33640]

---

RE: Ron Trackside 3D Printed Figures - Ron Trackside - 4th-Feb-24

Hi Hub,

Great work as always, It really pleases me to see my figures populating your layouts. 

Thank you for sharing and promoting my figures. 

I enjoyed working with you on this range with you. What shall we do Next? 

Ron

---

RE: Ron Trackside 3D Printed Figures - rallyhub - 4th-Feb-24

Hi Ron,

I am not finished yet. First a second set needs to be painted. The result will be shown here.

Hub

[attachment=33650][attachment=33651]

---

RE: Ron Trackside 3D Printed Figures - Fluff - 5th-Feb-24

Very nicely done Hub ,as you said ,the sitting guys not as difficult as first expected.???

---

RE: Ron Trackside 3D Printed Figures - rallyhub - 5th-Feb-24

Thank you Fluff.
The only critical part to paint was the umbrella between his knees.
Maybe you wouldn't expect it, but the most difficult figure in the set is the photographer in the red jacket.
His face is hidden behind the camera, making it very difficult to reach with a brush.

Here are the photos of my second set of Ron's rally spectator set.
I hope you like them.

[attachment=33668][attachment=33669]

[attachment=33670][attachment=33671]

---