What cars have you built and latest bodies from 3DP - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: 3D Printing (https://slotracer.online/community/forumdisplay.php?fid=56)
+--- Forum: 3DP (https://slotracer.online/community/forumdisplay.php?fid=57)
+--- Thread: What cars have you built and latest bodies from 3DP (/showthread.php?tid=2521)

---

RE: What cars have you built and latest bodies from 3DP - dvd3500 - 2nd-Mar-22

Nice!
Amazed at how hard it is for me to find a Wartburg given some of the curvy shapes here... :-)

---

RE: What cars have you built and latest bodies from 3DP - Kevan - 2nd-Mar-22

10 seconds in google is all it takes...

Wartburg 3D printable

---

RE: What cars have you built and latest bodies from 3DP - dvd3500 - 2nd-Mar-22

Maybe 5th or 6th times a charm...

Anyone want me to pay you to print it (in 1/32 and ideally 1/24 scale....)?

---

RE: What cars have you built and latest bodies from 3DP - AlexisGaitanis - 28th-Mar-22

A few more
[attachment=22334]
Ferrari 275 GTB/4
[attachment=22335]
Cobra Daytona coupe
[attachment=22336]
Fiat X1/9
[attachment=22337]
Autobianchi A112  1/24
[attachment=22338]
and 1/32
[attachment=22339]

---

RE: What cars have you built and latest bodies from 3DP - OXO cube - 28th-Mar-22

this will be the basis of a 3DP proxy build 
[attachment=22357]
Ferrari 350 Can am
[attachment=22358]
1st lick of paint

---

RE: What cars have you built and latest bodies from 3DP - chappyman66 - 29th-Mar-22

Chaparral 2D Daytona version.
[attachment=22359]

---

RE: What cars have you built and latest bodies from 3DP - Anthony B - 29th-Mar-22

ohhhhhhh nice - what scale??

---

RE: What cars have you built and latest bodies from 3DP - Kevan - 29th-Mar-22

(29th-Mar-22, 10:25 AM)Anthony B Wrote:  ohhhhhhh nice - what scale??

Which one?

---

RE: What cars have you built and latest bodies from 3DP - chappyman66 - 29th-Mar-22

The Chaparral is 1/32, basically like the Strombecker.

---

RE: What cars have you built and latest bodies from 3DP - JMay - 17th-Apr-22

Been playing with TPU filament which for those not aware is a flexible rubber type filament which can be used for printing mobile phone holders and other flexible items, and with some patience front tyres (these at 95 hardness so ideal zero grip).  Below is a 1/24 1980s generic F3 car alongside a SCX Ferrari 1/32 for scale that I have been working on since Christmas which incorporates the TPU front tyres and a TPU rear wing (virtually tear proof). 

Wheels & rear tyres are off the BRM 1/24 Escort MK1 and a NSR Evo 21.4K motor & 8:30 IL gearing drives it along. 

[attachment=22742]

Bit of a faff getting the TPU tyres on the BRM lipped rims but a lot easier in this size than the tyres I made for some 1/32 cars where it was easier to design a wheel for TPU than to use the standard shoulder wheels. 

Cheers
               JMay

---