Whats on your bench ... - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: General Discussion (https://slotracer.online/community/forumdisplay.php?fid=1)
+--- Forum: General Interest (https://slotracer.online/community/forumdisplay.php?fid=32)
+--- Thread: Whats on your bench ... (/showthread.php?tid=280)

---

RE: Whats on your bench ... - Kevan - 10th-Feb-22

(1st-Feb-22, 03:35 PM)Savage GT Wrote:  Not strictly on my bench ... but a recent addition to my tools:

A compressor with regulator and 2 airbrushes.
All budget stuff, but plenty good enough for me to see how I get on.

I have one of those, works great...sadly my input is letting it down.

...used last week to airbrush Vallejo VJ26701 Acrylic Gloss Varnish on a hydrofilmed Mosler.

---

RE: Whats on your bench ... - Savage GT - 16th-Feb-22

Yes, I haven't done a car yet, but have done a footbridge for the old mans railway which turned out OK.
I have bought a range of Vallejo acrylic model paints to use.
I used a custom mix to get the green, then gloss laquered with windsor and newton acrylic, brush weathered (my first ever attempt at weathering so excuse the poor execution) then matt Vallejo acrylic to protect.
I did get a couple of small runs, but as its at the back of the layout I can get away with it 

---

RE: Whats on your bench ... - BAracer - 26th-Mar-22

Building up my first JS chassis...

[attachment=22243]

---

RE: Whats on your bench ... - nkarres - 26th-Mar-22

Testing different 6 OHM chassis and bodys
[attachment=22249]

[attachment=22248]

[attachment=22247]


Nico

---

RE: Whats on your bench ... - woodcote - 2nd-Apr-22

[attachment=22430]

Pioneer Dodge Legend kit being prepared for our new WHO/digital class: first race in just over two weeks time.

Despite spraying outdoors in rather cold weather for these parts, I have managed to keep everything warm and minimise any orange-peeling in the top coat of green.

Pattos peel & stick decals (ideal for hard digital racing) ready for 7-10 days time. The chassis will be built and the cockpit and engine detailing finished by then.

---

RE: Whats on your bench ... - AlexisGaitanis - 2nd-Apr-22

I was so happy i finally made my MONO X printer work that i did nothging else.Here are the cars added to the to do pile.
5 Alfas (33,periscopica ,stradale Montreal,Giulietta sedan
3 Ferraris (712,Squalo,350)
and a Saab 96
[attachment=22431]


A second batch 
Ferrari 275 GTB,CObra Daytona coupe,Fiat X1/9,Autobianchi A112 1/24 and 1/32
[attachment=22432]

---

RE: Whats on your bench ... - DPJ - 3rd-Apr-22

I'm getting closer to the end with this one...

[attachment=22453]

---

RE: Whats on your bench ... - KensRedZed - 6th-Apr-22

I finally got around to gluing and truing some tires. No more egg-shaped tires. No more vibrations. Smooth acceleration, etc.

Besides requiring new tires. The beat up sidewinder McLaren needed the motor shaft trimmed. Now it goes back together.

[attachment=22530]

---

RE: Whats on your bench ... - Anthony B - 21st-Apr-22

Currently still working on the 1/32nd Atlas Brabham- the MOST brittle car I have ever had - you can see the splits - so many that I can no longer hide them - ces't la vie


[attachment=22834][attachment=22835]

[attachment=22836]


and a new 1/24th Ferrari GTO ( look it is not red   )

[attachment=22837][attachment=22838]


[attachment=22839][attachment=22840]

---

RE: Whats on your bench ... - Kevan - 21st-Apr-22

Resin printed Volvo 850 Estate and a chassis printed in CF-PETG

Chassis is for a SlotIt IL pod, the body isn't wide enough for a SW

[attachment=22841]

...Volvo first coat of paint...

---