Wheel Inserts or Not - Printable Version

Wheel Inserts or Not - Printable Version

+- SlotRacer Forum (https://slotracer.online/community)
+-- Forum: General Discussion (https://slotracer.online/community/forumdisplay.php?fid=1)
+--- Forum: General Interest (https://slotracer.online/community/forumdisplay.php?fid=32)
+--- Thread: Wheel Inserts or Not (/showthread.php?tid=2454)

Pages: 1 2 3

RE: Wheel Inserts or Not - Johnno - 20th-Sep-21

Seems majority like the inserts for varying reasons with the most being appearance. I hate them with a passion just like mirrors and wings, all useless items and unnecessarily weight.

I'm done seeing the inserts, wings and mirrors coming off not only my cars but others, I leave all these on the car if they came attached, if they come in the box/case as a part to be installed, they don't get installed, once an insert comes out/off during racing that's it for the inserts for me.

And I'm not about to spend $9 for useless weight from the inserts, the same for rear wings, class regs state must have wing on car if it came with the wing at race starts, soon as the posts break, cut them off and hot glue wing to car.

Interesting reading the posts for sure

RE: Wheel Inserts or Not - Gordon Steadman - 21st-Sep-21

I've been running a 24th scale E type Jag for some time now. It had plain wheels and, eventually, the fact that it didn't look right started to annoy me. Today, I stuck in some of Munter's resin wire wheel inserts and it looks like a Jag again.

A scale slot car once more rather than just something that might as well have a blob body on it and giant wings.

I guess I might be on the side of inserts.

PS: Pics of said Jag. It was good to see CUT 7 still racing at Goodwood at the weekend. Dick Protheroe's spirit lives on.

[attachment=18070][attachment=18071]

RE: Wheel Inserts or Not - Anthony B - 24th-Sep-21

Paint silver and then use the Tamiya 'Smoke' over the top - makes the wheels look pretty good ;)

RE: Wheel Inserts or Not - Johnno - 14th-Oct-21

Has been great reading the responses by all. After having just now started work on some cars I am leaning towards wheel inserts, yes I understand they do nothing but add weight, however they do finish the car off.

Saying this I've gone off and ordered some Staffs wheels Show Us Ya Slotz - Staffs Air Wheels

[attachment=18518]

RE: Wheel Inserts or Not - rallyhub - 14th-Oct-21

(20th-Sep-21, 07:46 PM)Johnno Wrote: Seems majority like the inserts for varying reasons with the most being appearance. I hate them with a passion just like mirrors and wings, all useless items and unnecessarily weight.

It depends on how far you want to go; leaving the whole body off saves even more weight! Bigsmile

The Staffs wheels are a nice alternative. Thumbup

RE: Wheel Inserts or Not - Johnno - 14th-Oct-21

(14th-Oct-21, 10:49 AM)rallyhub Wrote:
(20th-Sep-21, 07:46 PM)Johnno Wrote: Seems majority like the inserts for varying reasons with the most being appearance. I hate them with a passion just like mirrors and wings, all useless items and unnecessarily weight.

It depends on how far you want to go; leaving the whole body off saves even more weight!
The Staffs wheels are a nice alternative.

Well, I did say 'useless items and unnecessary weight' a body is a requirement so that doesn't fit the list Wrench

RE: Wheel Inserts or Not - JasonB - 14th-Oct-21

Proper wheels are a requirement for me. Genuine liveries and accurate bodies also.

But then I'm not much of a racer, and would prefer a set of realistically slow, but equally matched, and well modelled cars.

RE: Wheel Inserts or Not - Savage GT - 17th-Oct-21

A while back I bought a cheap chinese "mini lathe" for the purpose of turning down plastic wheels to make as inserts.
I have used it for various things, but not that, until today.

After working on some Fly MAN trucks for a friend, I was that pleased with how I got them to go, I ordered myself a pair of Merc's.
As I had exhausted Pendle's supply of components I used on his, I had to work it differently for mine.

While awaiting their arrival, Today I started work on trimming down tyre widths etc (on the mini lathe).
I was actually going to leave the wheels sans inserts as they IMO don't look massively out of place on a truck.

But then I thought I would have a go at turning down the fronts left over from my friends build.

It worked a treat:

[attachment=18578]
Unfortunately the back wheels are a lot harder to do, so its back to plan A and sans inserts Tappingfoot

RE: Wheel Inserts or Not - Kevan - 17th-Oct-21

I'm not fussed, inserts look nice if they're fitted but if not I don't bother.

Some classes require them, a lot of proxies require them, CSCRA require them.

RE: Wheel Inserts or Not - Kevan - 5th-Mar-24

A revisit to the wheel inserts matter...

Now as a regular entrant of Graham's proxies, wheel inserts are something I've had to grow to like, don't throw old plastic wheels away because they make great inserts for zero cost.